TECHNICAL INFO

KoroGraphics® Digital Wallcoverings has provided a number of resources to assist you with printing and installing the world’s best digital wallcovering solutions. We also have experts on staff who can answer all your questions on our full line of KoroGraphics products.

Technical Documents

KoroGraphics Installation Instructions (PDF)
KoroGraphics Surface Preparation and Adhesive Guidelines (PDF)
KoroGraphics Literature Package (PDF)
KoroGraphics HP9000 Take Up Tension Solution (PDF)
KoroGraphics New York City MEA 304-89M VOL 5 Type II (PDF)
KoroGraphics New York City MEA 303-89M VOL 5 Type I (PDF)
Microventing Technical Information (PDF)
KoroGraphics Technical Tips for Managing Print Shading (PDF)
CE Declaration of Conformity (PDF)

KoroGraphics was tested on these wide-format printers:
Durst®, Epson®, Gandi®, Hewlett Packard®, Mimaki®, Mutoh®, Océ®, Roland®, Seiko®, Vutek®

Improve: line speed, run cycle time, productivity and post-production grade out
Enhance: image impact, depth, dimension, durability and customer satisfaction
Minimize: delays, drywall preparation, installation issues, and add-on expenses

KoroGraphics Digital Wallcoverings Statistics

Physical Properties

	U.S. Units	Metric Units
Total weight:	21 oz.per lineal yd	651g PLM
Fabric weight:	2.7 oz.per lineal yd	83.7g PLM
Vinyl weight:	18.3 oz.per lineal yd	67.3g PLM
Thickness:	0.018 to 0.026 in	(Varies with texture) 0.46 to 0.66mm
Fabric:	Poly Cotton Osnaburg
	Tensile (Warp x Fill):50 x 55 lb. Minimum
	Tear (Warp x Fill):25 x 25 Minimum

Product Packaging
Roll size: 60 yds /30 yds
Material width: 54''(+/-1/4''inches)
Roll weight: 82 lbs./50 lbs.
Shipping weight: 90 lbs./54 lbs.
Core diameter: 3 inch ID Heavy Duty

Fire safety/Life safety/Heat detection*
Early Warning Effect® Life Safety and Property Protection.

Specifications /Testing /Certification
Federal specification: CCC-408-A Type II Class A
CFFA specification: CFFA-W-101-D Type II Class A

Fire Testing
NFPA 101® Life Safety Code®: NFPA 225** Class A
ASTM-E84 Tunnel Test** Class A
CAN S102M Tunnel Test** Class A
NFPA 286 Corner Burn Test***
Meets or exceeds requirements for Flame Spread, Smoke Developed and Flashover.
Underwriters Laboratories Listed and Labeled: Type II-J

*Product as supplied
**When applied to GRC board with Koroseal® A-848-B adhesive.
***When applied to 5/8" Type-X gypsum board with Koroseal A-848-B adhesive.